|
|
|
 |
| Displacement |
|
150cc |
| Power |
|
8.5hp |
| Bore |
|
35.0mm |
| Stroke |
|
32.0mm |
| Weight |
|
9.8 lbs - (includes ignition) |
| Fuel/Ratio |
|
Premium Gas mixed 32:1 (Yamalube 2S oil recommended) |
| Ignition |
|
4.8v-6v Microprocessor Auto Advance |
| Prop Size |
|
2 blade 26x16 = 5400rpm 2 blade 30x12 = 4700
(uses small RCS drill jig with 5mm bolts on a 30mm diameter) |
The newest addition to the RCS Family of Gasoline Radial Engines: The NEW RCS 150 Radial!
IN-STOCK NOW
The RCS 150 is supplied with an electronic computer controlled auto advance ignition. This ignition is rather unique, as the high voltage coils are mounted in the rear of the engine and the control unit connects to them with a multi-pin connector and only low voltage DC current is conducted in this cable. Each plug has its own high voltage coil so; there is no need for a pesky disributor. The timing sensor is also located inside the engine. The net result of this great arrangement is a neat installation that is quite compact. The ring collector exhaust system, shown in the photos, is standard equipment.
| Engine with Electronic Ignition |
$3325.00 |
| Spinner Adapter |
$22.50 |
| NEW RCS Four Stroke Tool Kit |
$38.50 |
| NEW! Laminated 26x16 for RCS 150 radial |
$45.00 |
|
